No products in the cart.
200LPM = 3.3LPS at 69m head OEM Bore Pump ME4BP-17-3-3
OEM 4″ 5.5hp Submersible Pump, Motor and Starter assembly.
Assembly includes pump, motor & control box.
150 liters per min / 2.5 liters per second @ 79m head
180 liters per min /3 liters per second @ 74m head
200 liters per min /3.3 liters per second @ 69m head
250 liters per min / 4 liters per second @ 54m head
280 liters per min / 4.6 liters per second @ 44m head
This model has a 4kw/5.5hp three 3 phase motor.
The Automatic Control Box comes standard with the 3 Phase model. It has the popular feature of ‘water level monitoring’ probes. These probes are installed down the bore with the pump and are wired into the control box. If there is not enough water, the system will shut down until the water level in the bore recovers and will allow the system to restart when the water level in the bore recovers. Handy if you don’t know the flow of the bore or have a low yielding bore. Contact Us to find out more about the Auto Control Box.
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below.
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump are:
This model has a 2″ (50mm) discharge thread, so if you are using 40mm pipe diameter then a 2″ Bore Cap would be recommended.
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 50mm pipe diameter then a 50 x 100mm (2″ riser) PVC Shroud Adapter would be recommended.
The info below is a guide only, you must check with your electrician on cable size.
3 phase/4 core – 1.5mm sq cable up to 50m. 2.5mm sq cable up to 85m. 4mm sq cable up to 135m. 6mm sq cable up to 195m.
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Flexible Riser Pipe
– Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the Couplings, ties, joiners and installation roller.
1 Year Warranty
|Litres Per Minute||
|kW / Hp||
4 / 5.5