-10%

15LPM = 0.25LPS at 151m head Wilo Bore Pump TWI 4.01-36B

$1,743.00 $1,569.00

View Detail
Compare

Description

Wilo 4″Bore Pump and Motor assembly.

Assembly includes pump, motor & starter box.

13 liters per min 0.21 liters per second @ 165m head
15 liters per min 0.25 liters per second @ 151m head
18 liters per min 0.3 liters per second @ 130m head
20 liters per min 0.33 liters per second @ 110m head
22 liters per min 0.36 liters per second @ 90m head

This bore pump has a 1.1kw/1.5hp 3w-PSC 1 phase motor.
The 3w-PSC 1 phase motor requires a starter box which comes standard with this model.

PSC motors have a lower starting current, so are the preferred motor when powered by a generator or solar.

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc.  These are listed below

Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

You will get a FREE 4″ Splice Kit when you purchase this bore pump and motor combination

Options to purchase with your kit to suit this pump

Bore Cap
This model has a 1 1/4 (32mm) discharge thread, so if you are using 32mm pipe diameter then a 1.25″ Bore Cap would be recommended.

Shroud Adapter

A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 32mm pipe diameter then a  32 x 100mm (1 1/4″ riser) PVC Shroud Adaptor would be recommended.

Electrical Cable
The info below is a guide only, you must check with your electrician on cable size.
1 Phase Cable (3-wire/4 core) – 1.5mm sq cable up to 40m, 2.5mm sq cable up to 70m, 4mm sq cable up to 120m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable – Available in 3mm cable or 4mm cable

Stainless Steel Support Cable Grips/Clamps – Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges Liquid Filled 63mm – Available in 0-800 kPa, 0-1000 kPa, 0-1600 kPa and 0-2500 kPa

Flexible Riser Pipe
– Series 100 is for depths up to 100.The sizes are 32 mm and 50 mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the Couplings, ties, joiners and installation roller.

2 year Warranty

Bore pump wet ends are universal which means they can be fitted to other brand 4″ motor.  If you would like a Franklin Motor instead of a Wilo, just ask and we can arrange this for you.

Wilo pumps are German made and are identical to the Grundfos.  We have a Grundfos / Wilo comparison chart available upon request.

Additional information

Litres Per Minute

15

Brand

Wilo

kW / Hp

1.1 / 1.5

Reviews

There are no reviews yet.

Be the first to review “15LPM = 0.25LPS at 151m head Wilo Bore Pump TWI 4.01-36B”

Your email address will not be published. Required fields are marked *