Surface Bore Pump AP150



Surface Bore Pump s – Convertible Deep Well Jet Pumps

Surface Bore Pumps are designed to sit at the top of the bore or well. They have 2 pipes attached with a venturi at the bottom. One pipe pushes water down to the venturi (with injectors) which forces water up the other pipe to the surface which is why these pumps need to be primed at all times. So a good quality foot valve is very important.

The Convertible Jet Pump and can be set up to supply the whole house from a bore or well.
If you can match the flow of the bore to the output of the pump you could run the Convertible Jet Pump all day, every day, without any problems of it running dry.

The Convertible Deep Well pumps are designed for lifting water well beyond the reach of conventional surface water pressure pumps. Convertible jet pumps are generally used in wells or bores where pumping levels can range from 10 to 50m. Supplied complete with plastic fittings, all that is needed are the twin pipes that to go down to the water source.

These Self Priming Pumps have 3 three different injector options available, their design enables easy installation either above the bore or away from the job.

While the smallest of these is suitable for small domestic application, the larger are suitable for a multitude of water moving applications from tank filling to domestic water supply.

Noryl pump internals, stainless steel motor shafts and long lasting mechanical seals ensure your product is correct from the get go. Quality IP44 rated motors with quality bearings will ensure your product is good for many pumping seasons.

They must not be subjected to more than 30 starts per hour at regular intervals.

The convertible deep well jet pump is a clean water pump consisting of pump, mechanical seal and single-phase asynchronous motor. The ejector is lowered in a well and connected to the pump body by two pipes for suction of water from the well or bore.

All pumps on this page come with your choice of injector kit.

If you intend to make it automatic, these Convertible Jet Pumps are best suited set up as a pressure system and you would have more control over the settings VIA the pressure switch that is on the pump.

Please contact me for Installation & Maintenance instructions.

Discharge Pressure kPa
34 69 103 138 172 207 241 276 310 345 379 414 448 483 517 552 586
P20 10 28 29 30 30 30 29 27 25 22 17 13 8
P30 15 28 30 31 32 32 31 31 31 30 39 23 22 21 19
20 22 27 29 31 33 34 34 32 27 24 20 19 16
25 24 26 24 21 19 10 8 7 6
35 18 16 15 15 13 10 7
50 12 11 10 9 6
Self Priming Pump with Injector P20 $1071
Self Priming Pump with Injector P30 $1071
w/ Pressure Switch, Gauge, 5 way Tee, 18L Pressure Tank & CV w/ Injector P20 $1396
w/ Pressure Switch, Gauge, 5 way Tee, 18L Pressure Tank & CV w/ Injector P30 $1396


Additional information









Model Number


Warranty Period

2 Years


There are no reviews yet.

Be the first to review “Surface Bore Pump AP150”

Your email address will not be published. Required fields are marked *