RM1500 Installation for External Pressure Pumps

Aquasaver installation for external pressure pumps. Water Diversion Valve Installation. 

Follow these simple steps on how to install the Aquasaver Water Diversion Valve to an External Household Pressure Pump.

Installing the Aquasaver Water Diversion Valve to a household pressure pump
Installation of an Aquasaver RM1500 Water Diversion Valve to an External Pressure Pump

Step 1

The RM1500 Valve is fitted onto the pump controller as shown in Fig. 1.

Tighten the 1″ FBSP loose nut with the fibre washer supplied.

 

Step 2

Connect mains water to the RM1500 using the 1″ FBSP connection.

 

Step 3

Connect outlet to the house supply using the 1″ FBSP connection.

 

NOTE

When using a pump with an automatic restart controller, allow for the outlet on the tank to be higher than the pump inlet.

This allows air to escape when tank is refilling and prevents airlocks.

Connection of the pump should be carried out according to manufacturer’s instructions.

 

All plumbing connections should be carried out by a licensed plumber, according to local council regulations.