Call us Now
047 789 9942
$280.00
Rule “Spongeability” feature leaves the bilge the driest ever. 12V – 69LPM Max
The Rule-Mate 12V 1100GPH Automatic Submersible Bilge Pump has Rule’s exclusive “Spongeability” feature. It is an all-in-one bilge pump and switch with no float switch required. The innovative design incorporates the bilge pump and water sensor in a single housing.
The unique Rule “Spongeability” feature leaves the bilge the driest ever – when water in the bilge reaches a certain height the solid state sensor automatically activates and the pump runs until the water is pumped out, reducing boat weight, saving fuel and minimizing bilge odour.
Pump check feature – simply touch the pump check button on the pump and hold for a few seconds to test cycle the pump.
The Rule-Mate 12V 1100GPH Automatic Submersible Bilge Pump has a threaded discharge port with O ring seal and are supplied with both 90 degree and straight hose ports – 20mm for 500 & 800 GPH – 28mm for 1100 GPH model.
Available in 12 volt or 24 volt (1100 only).
All pumps are oval shaped – base footprint size : 110mm x 70mm.
1100 GPH 69 LPM 12 volt 3.8 amp
Fuse size 7.5 amp
Supplied with 2 x straight hose outlets -1 x 25mm (1?) & 28mm (1 1/8?)
Rule bilge pump control panels – These Rule 3 way control panels can be used to control and indicate operation of all Rule bilge pumps and will allow the Rule-Mate pumps to function with a manual over-ride operation feature using the 3rd wire supplied in the wiring harness of the pump.
The control panel options are: RWB23 12 volt or RWB24 24 volt, RWB107 12 volt or RWB5188 24 volt
Brand | Rule |
---|---|
maximum-litres-per-minute | 69 |
Max Flow = 230LPM. Max Head = 8.4m. Particle handling size is 30mm
Fully Automatic Next Generation Rule 12V Bilge Pump - 31LPM Max
Fully Submersible. Max Flow = 94LPM. Max Head = 3.5m. Can Run-Dry for a short…
Fully Submersible. Max Flow = 69LPM. Max Head = 3.5m. Ignition Protected