Online Sales of Water Pumps Speedy Delivery Australia Wide Every Day sales@strongmanpumps.com.au
0
Items : 0
Subtotal : $0.00
View CartCheck Out
Online Sales of Water Pumps Speedy Delivery Australia Wide Every Day sales@strongmanpumps.com.au

Call us Now
047 789 9942

0
Items : 0
Subtotal : $0.00
View CartCheck Out

45LPM = 0.75LPS at 155m head OEM Bore Pump ME4BP-30-3-1

$850.00

3hp 0.75 liter per second 45LPM Submersible Bore Pump

Description

Buy 3hp Bore Pump, Motor and Starter assembly.

Assembly includes 4 inch submersible pump, motor & starter only.

2.5m³/h flow ratings

33 liters per min / 0.55 liters per second @ 200m head
40 liters per min / 0.66 liters per second @ 180m head
46 liters per min / 0.76 liters per second @ 160m head
51 liters per min / 0.85 liters per second @ 140m head
52 liters per min / 0.86 liters per second @ 130m head
54 liters per min / 0.90 liters per second @ 120m head

This model has a 2.2kw/3hp 3-wire (4-core) single 1 phase motor.

The (optional) Automatic Control Box can be purchased separately. You will need to contact me if you would like to purchase this pump with the Automatic Control Box. As with the starter box, the Automatic Control Box contains the circuit breaker and capacitor. However, it has the added feature of ‘water level monitoring’ probes. These probes are installed down the bore with the pump and are wired into the control box. If there is not enough water, the system will shut down until the water level in the bore recovers and will allow the system to restart when the water level in the bore recovers. Handy if you don’t know the flow of the bore or have a low yielding bore.

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump

Bore Cap

This model has a 1 1/4 (32mm) discharge thread, so if you are using 32mm pipe diameter then a 1.25” bore cap would be recommended.

Shroud Adapter

A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 32mm pipe diameter then a 32 x 100mm (1 1/4″ riser) PVC Shroud Adapter would be recommended.

Electrical Cable

The info below is a guide only, you must check with your electrician on cable size.
3-wire/4 core:

  • 2.5mm sq cable up to 25m
  • 4mm sq cable up to 40m
  • 6mm sq cable up to 60m

Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable – Available in 3mm cable or 4mm cable

Stainless Steel Support Cable Grips/Clamps – Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges Liquid Filled 63mm – Available in 0-800kPa, 0-1000kPa, 0-1600kPa and 0-2500kPa

Flexible Riser Pipe

– Series 100 is for depths up to 100. The sizes are 32mm and 50mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the couplings, ties and joiners.

Installation Roller

The installation roller fits on the top of the bore casing making it easy to lift and lower the bore pump down the borehole.

 

Motor SizeMotor Size 2.2kw / 3hp
PhaseSingle 1 Phase 3-wire
Rated Flow (LPM)45
Size4″ Inch
Discharge (mm)32mm – 1.25″
BrandOEM
Warranty Period1 Year