No products in the cart.
Pressure Pump for Water Tanks – DJ58
The DJ58 is a WaterPro Pressure Pump for Water Tanks. It comes with an Automatic Pressure Switch that will automatically start the pump when a tap is turned on and will automatically turn the pump off when the tap is closed. The automatic pressure controller gives consistent pressure supply, has run dry protection and auto restart.
This self priming pump is good for supplying rainwater from your tank to an average low set house or a 2 storey unit with toilet, laundry and one bathroom. It is perfectly suited for a small home with 2-4 taps. It can be used to supply water from your water tank to the house or pressure boosting. It is Certified under AS4020 for potable water.
Power: 2.5 Amps / 370Watts
Rated Flow: 25LPM @ 20m head
Maximum Flow: 55LPM
Maximum Head (pressure): 33m (324 kPa) (47 PSI)
Suction Lift: 8m
Number of Taps: 2-4
Inlet/Outlet: 25FBSP/ 25MBSP
Cable Length: 1.5m
The construction of this pump is:
- Noryl Jet Diffuser and Impeller
- Motor IP44 with insulation class B
- 304 Stainless Casing and Pump Shaft
- Carbon/Ceramic Mechanical Seals for reliability
- Quick Plug Pressure Controller
The DJ58 Pressure Pump for water tanks is very easy to install.
Comes with a 1 Year Warranty.
|kW / Hp||
0.37 / 0.5
|Rated Litres Per Minute (LPM)||
|Rated Head (m)||
|Maximum Litres Per Minute||
|Maximum Head (m)||
|Number of Taps||
|Suction Depth (m)||