No products in the cart.
Franklin Electric 1 Single Phase Motor Protection – Pumptec IR
Franklin Electric Pumptec IR 1 Single Phase Motor Protection
Franklin Electric Pumptec IR is a microcomputer-based protection device that continuously monitors motor load and power line conditions to provide protection against dry well conditions, waterlogged tanks and abnormal line voltage conditions.
Pumptec IR for 2- and 3-wire Single 1 Phase motors from 0.37 to 1.1kW
Pumptec interrupts power to the motor whenever the load drops quickly or below a preset level.
Indicator lights on the cover provide complete system status which can be easily viewed without removing the cover.
Pumptec is optimised to work with 2 & 3 wire single phase motors from 0.37 to 1.1 kW. An underload (dry well) adjustment is provided to address unusual situations.
Additional Pumptec Features
• Easily Adjustable Sensitivity Settings
• Run and Fault Indicator Lights
• Heavy Duty Relay
• Alarm Circuit Contacts
• Remote Control Option
• UL/CSA Listed/ CSIPR14
Pumptec Protection Features
• Dry Well (Underload)
• Over and Under Voltage
• Rapid Cycle
• Bound Pump
• System Status Monitor
• Heavy Duty Relay
• 115V / 230V 60/50Hz Operation
Remote Communication – Pumptec also features an option for remote communication. With software available at no charge from Franklin Electric, a Pocket PC or Palm OS device with an infrared port can be used to remotely monitor and adjust Pumptec settings. Access to a fault history makes diagnosis of system problems quick and easy.
Pumptec Remote Control Features
• Over & Under Load Settings
• Over & Under Voltage Settings
• Reset Time Settings
• Sensitivity & Timeout Adjustments
• Fault History (Last 15 Faults) load
Other Single 1 Phase Motor Protection Devices
If you are looking for a single phase motor protection device for a 3W-PSC motor then you need a Franklin Pumptec Plus. These will protect single phase 2-wire, 3-wire and 3W-PSC motors from 0.37kw to 3.7kw
Single 1 Phase
Franklin 3-wire 1 phase, Franklin 2-wire 1 Phase