No products in the cart.
Automatic Submersible Pressure Pump RPS050
The RPS Multistage Submersible Pressure Pump has Integrated Pressure Control and Run-Dry Protection.
Automatic Submersible Pressure Pump
This submersible drainage / pressure pump comes complete with an integrated Pressure Controller and integrated run-dry protection.
Model Number = RPS050
Rated Flow = 48LPM @ 40m head
Max Flow = 86LPM
Max Head = 50m
Inlet / Outlet = 25mm / 1″
Number of Taps = 7
Warranty = 2 Years
The compact design and base allows for easy application in a rain water tank or for draining clean water from underground or above ground tanks and pits. The base keeps the suction out of sludge build up.
The submersible pressure pump are completely constructed in non-corrosive material and are fitted with 10m cable for easy connection to power supply.
Mounting base fitted for a firm and stable positioning during installation and operation.
Application for the Submersible Pressure Pump
- Clean Water Transfer
- Household Supply
- Rainwater Tanks
- Industrial Cleaning
- Commercial Laundries
- Rain to Mains Backup Systems
Features and Benefits of the Submersible Pressure Pump
- Integrated Pressure Controller
- Integrated run-dry protection
- Auto Restart when water over 150mm
- Compact design
- Water-cooled motor
- Corrosion resistant
- Base keeps the suction out of sludge build-up (must be installed 100mm off base of tank)
Submersible Pressure Pump Construction
- Gr 304 Stainless Steel Outer Casing
- Plastic Impeller
- AISI 304 Stainless Steel Motor Shaft
- Plastic Diffuser
- Plastic Pump Base and Discharge Body
NOTE: Install min 100mm above bottom of tank to keep out of sludge and debris
|Maximum Head (m)||
|Maximum Litres Per Minute||
|Number of Taps||
|kW / Hp||
0.8 / 1.1