No products in the cart.
Showing 1–30 of 55 results
Good for systems that use pressure switches, level switches or other pilot devices.
2- and 3-wire Single 1 Ph motors from 0.37 to 1.1kW
These control boxes are designed for use with Franklin 3-wire single 1 Phase submersible motors through to 0.75kw
CP3 Control Panel - 7.5kw
CP3 Control Panel - 5.5kw
CP3 Control Panel - 4kw
CP3 Control Panel - 3kw
CP3 Control Panel - 2.2kw
CP3 Control Panel - 1.5kw
CP3 Control Panel - 1.1kw
CP3 Control Panel - 0.75kw
CP3 Control Panel - 0.55kw
CP3 Control Panel - 0.37kw
Option HPD - Inbuilt High or Low Pressure Protection c/w Delay Timer
Option MTC - 30 Hour manual count down timer
Option TC - 24 Hr daily time clock (Analogue)
Option LLR - Low Level Protection Circuit with Relay
Option TCU - Thermistor Overtemperature Relay
Option NFT - No Flow Circuit c/w Delay Timer
Option BLC - Probe Relay to suit 1 or 2 Probes
Option ACT - Ammeter CT Operated
SubMonitor, 3-Phase Pump Protection from 2.2 kW to 150 kW
Use with the 3 phase Submonitor motor protection unit
2-wire, 3-wire and 3w-PSC 1 Ph motors from 0.37 to 3.7kW
Level Control Panel suitable for 1 one or 2 two Probe Systems. Low Bore Indication with Reset Button ...
Level Control Panel suitable for 1 one or 2 two Probe Systems up to 2.2kw
0.75hp/0.55kw Single 1 Phase 2-wire. Max Flow = 80LPM @ 22m head. Min Flow = 40LPM @ 37m ...
5-8 Taps -0.75hp - Flow = 40LPM @ 25m head. Max Flow = 71LPM. Max Head = 40m ...
2-4 Taps -0.5hp - Flow = 25LPM @ 20m head. Max Flow = 55LPM. Max Head = 33m ...
0.75hp 100LPM @ 4m head. Max Flow = 150LPM. Max Head = 7m. 35mm particle size handling