70LPM = 1.16LPS at 75m head Pentax Bore Pump 4S100-18

$1,314.00

View Detail
Compare

Description

Pentax 4″ Bore Pump with Franklin Motor Assembly.

Assembly includes pump and motor only.

45 liters per min /0.75 liters per second @ 101m head
50 liters per min /0.83 liters per second @ 98m head
60 liters per min /1 liter per second @ 87m head
70 liters per min /1.16 liters per second @ 75m head
80 liters per min /1.33 liters per second @ 60m head

This 4S100-18 has a 1.5kw/2hp 3 phase Franklin motor.
The 3 phase will require a 3 phase contactor/starter which will need to be ordered separately.

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump

Splice Kit

A splice kit is used to join the electrical drop cable from the motor to your existing or new electrical drop cable.  The join must be waterproof as it is submerged under the water.  Many problems can occur if this join is not 100% waterproof.  You can find the 4″ Splice Kits here.

Bore Cap
This model has a 1 1/4 (32mm) discharge thread, so if you are using 32mm pipe diameter then a 1.25″ Bore Cap would be recommended.

Shroud Adapter
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 32mm pipe diameter then a 32 x 100mm (1 1/4″ riser) PVC Shroud Adapter would be recommended.

Electrical Cable
The info below is a guide only, you must check with your electrician on cable size.
3 Phase Cable (3-wire/4 core) – 1.5mm sq cable up to 120m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable – Available in 3mm cable or 4mm cable

Stainless Steel Support Cable Grips/Clamps – Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges Liquid Filled 63mm – Available in 0-800 kPa, 0-1000 kPa, 0-1600 kPa and 0-2500 kPa

Flexible Riser Pipe
– Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the Couplings, ties, joiners and installation roller.

3 Phase Starter / Contactor
The correct size contactor for this model is a 1.5kw/2hp contactor

2 Year Warranty

Additional information

Litres Per Minute

70

Brand

Franklin Electric, Pentax

kW / Hp

1.5 / 2

Reviews

There are no reviews yet.

Be the first to review “70LPM = 1.16LPS at 75m head Pentax Bore Pump 4S100-18”

Your email address will not be published. Required fields are marked *