No products in the cart.
70LPM = 1.16LPS at 75m head Pentax Bore Pump 4S100-18
4″ Pentax Bore Pump and motor assembly.
Assembly includes pump, motor & starter only.
45 liters per min /0.75 liters per second @ 101m head
50 liters per min /0.83 liters per second @ 98m head
60 liters per min /1 liter per second @ 87m head
70 liters per min /1.16 liters per second @ 75m head
80 liters per min /1.33 liters per second @ 60m head
This 4S100-18 has a 1.5kw/2hp 3-wire Franklin motor.
The 3-wire 1 phase require a starter box which comes standard when you buy this combination.
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump:
A splice kit is used to join the electrical drop cable from the motor to your existing or new electrical drop cable. The join must be waterproof as it is submerged under the water. Many problems can occur if this join is not 100% waterproof. You can find the 4″ Splice Kits here.
This model has a 1 1/4 (32mm) discharge thread, so if you are using 32mm pipe diameter then a 1.25″ Bore Cap would be recommended.
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 32mm pipe diameter then a 32 x 100mm (1 1/4″ riser) PVC Shroud Adapter would be recommended.
The info below is a guide only, you must check with your electrician on cable size.
1 Phase Cable (3-wire/4 core) – 1.5mm sq cable up to 30m, 2.5mm sq cable up to 60m, 4mm sq cable up to 100m, 6mm sq cable up to 150m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Flexible Riser Pipe
– Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the Couplings, ties, joiners and installation roller.
Single 1 Phase Motor Protection
If you purchase a single phase 3-wire kit, then you will need a Pumptec Plus as your motor protection device.
2 Year Warranty
|Litres Per Minute||
Franklin Electric, Pentax
|kW / Hp||
1.5 / 2