300LPM = 5LPS at 22m head OEM Bore Pump ME4BP-7-3-1

$950.00

View Detail
Compare

Description

OEM 4″ 3hp Submersible Pump, Motor and Starter assembly.

Assembly includes pump, motor & starter only.

170 liters per min / 2.8 liters per second @ 34m head
200 liters per min /3.3 liters per second @ 31m head
250 liters per min /4 liters per second @ 27m head
300 liters per min / 5 liters per second @ 22m head
350 liters per min / 5.8 liters per second @ 18m head

This model has a 2.2kw/3hp 3-wire (4-core) single 1 phase motor.

The (optional) Automatic Control Box can be purchased separately.  As with the starter box, the Automatic Control Box contains the circuit breaker and capacitor.  However, it has the added feature of ‘water level monitoring’ probes.  These probes are installed down the bore with the pump and are wired into the control box. If there is not enough water, the system will shut down until the water level in the bore recovers and will allow the system to restart when the water level in the bore recovers. Handy if you don’t know the flow of the bore or have a low yielding bore. Contact Us to find out more about the Auto Control Box.

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc.  These are listed below.
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump are:

Bore Cap
This model has a 2″ (50mm) discharge thread, so if you are using 40mm pipe diameter then a 2″ Bore Cap would be recommended.

Shroud Adapter
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 50mm pipe diameter then a 50 x 100mm (2″ riser) PVC Shroud Adapter would be recommended.

Electrical Cable
The info below is a guide only, you must check with your electrician on cable size.
3-wire/4 core –  2.5mm sq cable up to 25m.  4mm sq cable up to 40m. 6mm sq cable up to 60m.  10mm sq cable up to 100m.  16mm sq cable up to 165m.
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable – Available in 3mm cable or 4mm cable

Stainless Steel Support Cable Grips/Clamps – Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges Liquid Filled 63mm – Available in 0-800 kPa, 0-1000 kPa, 0-1600 kPa and 0-2500 kPa

Flexible Riser Pipe
– Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the Couplings, ties, joiners and installation roller.

1 Year Warranty

Additional information

Litres Per Minute

300

Brand

OEM

kW / Hp

2.2 / 3

Reviews

There are no reviews yet.

Be the first to review “300LPM = 5LPS at 22m head OEM Bore Pump ME4BP-7-3-1”

Your email address will not be published. Required fields are marked *