24V DC Manual Drainage Pump – Rule 1500


View Detail
SKU: RWB100 Categories: ,


Rule 1500 24V Manual Bilge Drainage Pump

This compact submersible 94LPM (1500 GPH) 24V DC Manual Drainage Pump is mainly used as a bilge or bait pump but can be used as a water drainage pump where normal 240V power is not available.

The High Capacity 24V DC Manual Drainage Pump is a totally submersible pump with double insulated, dual water / air cooled motors manufactured by Rule specifically for marine pump use.

The pumps are ignition protected (will not create a spark) and they won’t burn out if run dry for short periods.

Moisture tight wiring, anti-airlock feature, stainless steel shaft and Rule’s exclusive Teflon seals combine to give total reliability and high performance.

These pumps include a snap-on strainer base for easy cleaning and fitting, stainless mounting screws and a clip to secure a float switch to the pump.

As this is a Manual Rule Bilge Pump, it requires a Rule float switch to operate automatically.

  • 1500 US gallons per hour – 94 litres per minute (depending on the head)
  • Compact – 152mm H x 108mm W
  • Reliable water/air cooled motor
  • Fully Submersible
  • Teflon seals and stainless shaft
  • Can Run-Dry for short periods
  • 24 volt DC – 2.3 amp draw
  • Hose outlet suits 28mm (1 1/8″) hose
  • 24 volt 1500 GPH 2.3 amp
  • 3 year limited warranty

I have included a flow chart, however the output, water flow and pumping height will vary depending on battery charge and type of installation.

Additional information



Outlet Size


Maximum Litres Per Minute



There are no reviews yet.

Be the first to review “24V DC Manual Drainage Pump – Rule 1500”

Your email address will not be published. Required fields are marked *