No products in the cart.
240LPM = 4LPS at 23m head Wilo Bore Pump TWI 4.14-05-B
Wilo 2hp Bore Pump and motor assembly.
Equivalent to Grundfos SP 14A 5
The Wilo 2hp Bore Pump Assembly includes pump, motor & starter box.
300 liters per min 5 liter per second @ 15m head
285 liters per min 4.75 liters per second @ 18m head
270 liters per min 4.5 liters per second @ 20m head
255 liters per min 4.25 liters per second @ 22m head
240 liters per min 4 liters per second @ 24m head
225 liters per min 3.75 liters per second @ 25 head
210 liters per min 3.5 liters per second @ 26m head
195 liters per min 3.25 liters per second @ 27m head
180 liters per min 3 liters per second @ 28m head
The TWI 4.14-05-B has a 1.5kw/2hp 3w-PSC 1 phase motor.
The 3w-PSC 1 phase require a starter box which comes standard when you buy this combination.
PSC motors have a lower starting current, so are the preferred motor when powered by a generator or solar.
Receive a FREE 4″ Splice Kit with every Wilo Bore Pump and Motor Combination.
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below.
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump
This model has a 2″ (50mm) discharge thread, so if you are using 50mm pipe diameter then a 2″ Bore Cap would be recommended. If you are using a 1.5″(40mm) pipe diameter then a 1.5″ Bore Cap would be recommended.
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 50mm pipe diameter then a 50 x 100mm (2″ riser) PVC Shroud Adapter would be recommended.
The info below is a guide only, you must check with your electrician on cable size.
1 Phase Cable (3-wire/4 core) – 1.5mm sq cable up to 30m, 2.5mm sq cable up to 60m, 4mm sq cable up to 100m, 6mm sq cable up to 150m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Flexible Riser Pipe
– Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm, 50mm, 76mm, 102mm, 127mm, 152mm & 200mm internal diameter.
– As well as the Couplings, ties, joiners and installation roller.
Single 1 Phase Motor Protection
For this model, you will need a Pumptec Plus as your motor protection device.
Bore pump wet ends are universal which means they can be fitted to other brand 4″ motor. If you would like a Franklin Motor instead of a Wilo, just ask and we can arrange this for you.
Wilo pumps are German made and are identical to the Grundfos. We have a Grundfos / Wilo comparison chart available upon request.
2 Year Warranty
|Litres Per Minute||
|kW / Hp||
1.5 / 2