No products in the cart.
15LPM = 0.25LPS at 56m head Pentax Bore Pump 4S25-13
Pentax 4″Bore Pump with Franklin Electric motor assembly.
Assembly includes pump and motor only.
13 liters per min 0.21 liters per second @ 62m head
15 liters per min 0.25 liters per second @ 56m head
18 liters per min 0.3 liters per second @ 47m head
20 liters per min 0.33 liters per second @ 42m head
22 liters per min 0.36 liters per second @ 34m head
This 4S25-10 has a 0.37kw/0.5hp 2-wire 1 phase Franklin Electric motor.
The 2-wire 1 phase motor doesn’t require a starter box.
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump
This model has a 1 1/4 (32mm) discharge thread, so if you are using 32mm pipe diameter then a 1.25″ Bore Cap would be recommended.
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
If using 32mm pipe diameter then a 32 x 100mm (1 1/4″ riser) PVC Shroud Adaptor would be recommended.
The info below is a guide only, you must check with your electrician on cable size.
1 Phase Cable (2-wire/3 core) – 1.5mm sq cable up to 120m, 2.5mm sq cable up to 210m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Flexible Riser Pipe
– Series 100 is for depths up to 100.The sizes are 32 mm and 50 mm internal diameter.
– Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
– As well as the Couplings, ties, joiners and installation roller.
Single Phase Motor Protection
If you purchase a single phase kit, then you will need a Pumptec as your motor protection device.
2 year Warranty
|Litres Per Minute||
Franklin Electric, Pentax
|kW / Hp||
0.37 / 0.5