No products in the cart.
12V Manual Bilge Drainage Pump – Rule 800
Rule 800 12V Manual Bilge Drainage Pump
This compact submersible 50LPM (800 GPH) 12V Manual Bilge Drainage Pump is mainly used as a bilge or bait pump but can be used as a water drainage pump where normal 240V power is not available.
The 12V Manual Bilge Drainage Pump is a totally submersible pump with water cooled, ignition protected motor, stainless steel shaft and snap-off strainer base is extremely efficient, draws low current and offers high capacity output in a very compact housing, to fit into the smallest available space.
As this is a Manual Rule Bilge Pump, it requires a Rule float switch to operate automatically.
- 800 US gallons per hour – 50 litres per minute (depending on the head)
- Compact – 95mm H x 61mm W
- Fully submersible
- Ignition protected – won’t create a spark
- 12 volt DC – 2.8 amp draw
- Hose outlet suits 20mm (3/4″) hose
- 12 volt 800 GPH 2.8 amp
- 3 year limited warranty
I have included a flow chart, however the output, water flow and pumping height will vary depending on battery charge and type of installation.
|Maximum Litres Per Minute||