No products in the cart.
12V DC Manual Heavy Duty Bilge Drainage Pumps – Rule 2000
Rule 2000 12V Manual Bilge Drainage Pump
These heavy duty126LPM (2000 GPH) 12V DC Manual Heavy Duty Bilge Drainage Pumps are engineered to commercial standards and are the world’s largest selling high capacity submersible DC electric bilge pumps.
The 12V DC Manual Heavy Duty Bilge Drainage Pumps are mainly used as bilge or bait pumps but can be used as a water drainage pump where normal 240V power is not available.
The High Capacity 12V DC Manual Heavy Duty Bilge Drainage Pumps are a totally submersible pump with double insulated, dual water / air cooled motors manufactured by Rule specifically for marine pump use.
The pumps are ignition protected (will not create a spark) and they won’t burn out if run dry for short periods.
Moisture tight wiring, anti-airlock feature, stainless steel shaft and Rule’s exclusive Teflon seals combine to give total reliability and high performance.
These pumps include a snap-on strainer base for easy cleaning and fitting, stainless mounting screws and a clip to secure a float switch to the pump.
As this is a Manual Rule Bilge Pump, it requires a Rule float switch to operate automatically.
- 2000 US gallons per hour – 126 litres per minute (depending on the head)
- Compact – 152mm H x 108mm W
- Reliable water/air cooled motor
- Fully Submersible
- Teflon seals and stainless shaft
- Can Run-Dry for short periods
- 12 volt DC – 8.4 amp draw
- Hose outlet suits 28mm (1 1/8″) hose
- 12 volt 2000 GPH 8.4 amp
- 3 year limited warranty
I have included a flow chart, however the output, water flow and pumping height will vary depending on battery charge and type of installation.
|Maximum Litres Per Minute||