No products in the cart.
12V DC Manual Drainage Pump – Rule 1500
Rule 1500 12V Manual Bilge Drainage Pump
This compact submersible 94LPM (1500 GPH) 12V DC Manual Drainage Pump is mainly used as a bilge or bait pump but can be used as a water drainage pump where normal 240V power is not available.
The High Capacity 12V DC Manual Drainage Pump is a totally submersible pump with double insulated, dual water / air cooled motors manufactured by Rule specifically for marine pump use.
The pumps are ignition protected (will not create a spark) and they won’t burn out if run dry for short periods.
Moisture tight wiring, anti-airlock feature, stainless steel shaft and Rule’s exclusive Teflon seals combine to give total reliability and high performance.
These pumps include a snap-on strainer base for easy cleaning and fitting, stainless mounting screws and a clip to secure a float switch to the pump.
As this is a Manual Rule Bilge Pump, it requires a Rule float switch to operate automatically.
- 1500 US gallons per hour – 94 litres per minute (depending on the head)
- Compact – 152mm H x 108mm W
- Reliable water/air cooled motor
- Fully Submersible
- Teflon seals and stainless shaft
- Can Run-Dry for short periods
- 12 volt DC – 4.8 amp draw
- Hose outlet suits 28mm (1 1/8″) hose
- 12 volt 1500 GPH 4.8 amp
- 3 year limited warranty
I have included a flow chart, however the output, water flow and pumping height will vary depending on battery charge and type of installation.
|Maximum Litres Per Minute||